Estate Swing Manuel d'instructions télécharger pdf (Page 12)

IMPORTANT: Determining Correct Setback

2.3

PULL TO OPEN - Standard operation. This means the gate operator is mounted on the

inside of the property and pulls your gate in towards the property.

A B

7.5” 7.5” 90

7” 7” 100

6.5” 6.5” 110

To determine the position of the gate mounting bracket (above is for the post mounting

bracket) refer to step 9 in the section “Installation of operator”

To the right are 3 common exam-

ples of setback mountings. These

are not the only options for mount-

ing.

There a 3 factors to keep in mind

when finding the setback mounting:

1) The measurements must be cor-

rect from the center of the hinge of

the gate to the center of the hole on

the mounting bracket.

2) There must be clearance for your

opener to attach to your gate in the

closed position. (open position on

push to open install - 4.8)

3) The brackets do not move or pivot

after mounting, if you can achieve the

setback and clearance then bracket

position is inconsequential.

It is best to C-Clamp brackets on and

test arm movement clearance before

permanently attaching them.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Pas de commentaire

Estate Swing Manuel d'instructions Page 12