Estate Swing Manuel d'instructions télécharger pdf (Page 30)

Wiring the Operator Arm(s)

Attaching Arm Cover

1. Fit the bottom cover with the supplied cable gland.

2. Run the 5 Conductor wire through the cable gland and tighten the cable gland to squeeze

the wire.

3. After attaching the wire according to the picture below and the chart on the following

page, cover the operator arm terminal board with

3.4

Use the following page in conjunction with this picture to

correctly wire your arm(s).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Pas de commentaire

Estate Swing Manuel d'instructions Page 30