Estate Swing Manuel d'instructions télécharger pdf (Page 9)

Tools Needed

• Power Drill

• Crescent Wrench

• Flat Head Screwdriver

• Hacksaw

• Phillips Head

Screwdriver

• C-Ring Pliers

• Tape Measure

• Level

• Wire Strippers

• C-clamps

• 3/8”, 1/4”, 5/16” Drill

Bits

Other items that may be needed prior to commencing installation. Bolded items are necessary

to all applications.

• Start and stop post, bracket or door stop. Although the FAAC Estate swing 1600 features built

in limit switches some may choose to use positive stops:

• 16, 14 or 12 gauge, 2 conductor stranded direct burial low voltage wire will be required

to run power to your operator. Length is determined by distance between transformer power

supply and the control box.

• 4 - 3/8” Carriage Bolts will be needed to connect the 2 “L” shaped brackets to the post.

Length will be determined by the size of your posts.

• A metal support bracket may be needed to achieve the appropriate desired setback. The metal

support bracket will be bolted or welded to your post to give a larger amount of space to mount

the provided mounting bracket.

• A voltage meter and digital camera may be necessary to run diagnostic checks.

• If your transformer is going to be plugged into an outdoor outlet you will need to weatherproof

that outlet and transformer. Electrical boxes or plug covers can be obtained from a local hard-

ware store to accommodate both the plug and transformer.

• Hardware to attach the control box to a post or fence.

• Watertight connectors for running wires into the control box.

1.4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Pas de commentaire

Estate Swing Manuel d'instructions Page 9