Estate Swing Manuel d'instructions télécharger pdf (Page 31)

E-S 300 / 302 Classic Series Instruction Manual

3.5

For Your Convenience

The green terminal strips on the control board are easily removed for wiring. Simply pull

straight out on the terminal strip to remove it from the board. It will slide right off. Slide it

back on when you are finished with your wiring connections.

Be sure you are placing your wires in the

terminal block correctly.

Take the terminal block off of the control board

to insert wires. Hold with screw terminals facing

upward.

Turn the screw counter-clockwise to open the

terminal and clockwise to close the terminal.

The terminals come closed. Be sure not to mis-

take this for open and insert the wires below the

terminal clamp. This will lack the conductivity to

complete the circuit.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 54 55

Pas de commentaire

Estate Swing Manuel d'instructions Page 31