Estate Swing Manuel d'instructions télécharger pdf (Page 52)

E-S 300 / 302 Classic Series Instruction Manual

5.7

Control Board Overview

Light:

Sends pulses of 24VDC only while gate is running, and whether it is open

or closed.

Motor 1:

L1-1, L1-2 = 24VDC power to single motor or master motor

Motor 2:

L2-1, L2-2 = 24VDC power to slave motor

Limit 1:

OL1 = Open limit for single motor or master (normally closed)

V+ = Common for limits, +12VDC

CL1 = Closed limit for single motor (normally closed)

Limit 2:

OL2 = Open limit for slave motor (normally closed)

V+ = Common for limits, +12VDC

CL2 = Closed limit for slave motor (normally closed)

Photocell:

Photo = Input for safety eye photo beam connection (normally closed)

GND = Ground for photocell power/ground for photo connection

V+ = +12VDC, Max 100 milliamps for photocell power

+24V = +24VDC, Max 200 milliamps for accessory power

Button:

PUSH 1 = Ground for Push 1 Accessory

*PUSH 1 / V+ is for push buttons, keypads, receivers, or any other dry

and momentary contact.

COM = Positive voltage +12VDC for Push 1 or Push 2 accessory (relay

only, not main power)

PUSH 2 = Ground for Push 2 accessory

*PUSH 2 / V+ is for exit wand, exit loops or other open only dry contact

and momentary contact

E_Lock:

Solenoid lock output - 12VDC (4 Amp max)

A = Positive B = Negative

Fuses:

F1 = 8A 250V, protects motor 1

F2 = 8A 250V, protects motor 2

F3 = 2A 250V, protects accessory output +24V

1 2 ... 47 48 49 50 51 52 53 54 55

Pas de commentaire

Estate Swing Manuel d'instructions Page 52