Estate Swing Manuel d'instructions télécharger pdf (Page 40)

E-S 300 / 302 Classic Series Instruction Manual

4.3

Determine Run Time

Once you complete the first run, press the button and actuate your gate a

few times. When the gate stops on the limits: If the gate has stopped short

of or further than desired position, adjust the limit switches:

After you have your limits in the correct position secure the position of the

switches with the screws and run your gate through a few cycles. On the

display you will see a count while the arms are moving. This is your run time.

Record your run time below.

Actual Run Time:

Note: The above example is for Pull-To-Open operation. If you

are installing your gate opener as Push-To-Open then the open

limit will be reverse of the above.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 54 55

Pas de commentaire

Estate Swing Manuel d'instructions Page 40