Estate Swing Manuel d'instructions télécharger pdf (Page 39)

E-S 300 / 302 Classic Series Instruction Manual

4.2

First Run

This is our recommended procedure to run the gate for the first time.

PUSH 1 or PUSH 2 to increase or decrease the parameter. Then press SET button to

move to the next parameter.

1. Press SET button to begin.

2. LED shows P1: Press Push 1 to get P1 setting to 30.

3. Press SET button.

4. LED shows P2: Press Push 1 to get P2 setting to 10.

5. Press SET button.

6. LED shows P3: Press Push 1 to get P3 setting to 30.

7. Press SET button.

8. LED shows P4: Press Push 1 to get P4 setting to 3.

9. Press SET button.

10. LED shows P5: Press Push 1 to get P5 setting to 2.

11. Press SET button.

12. LED shows P6: Press Push 1 to get P6 setting to 10.

13. Press SET to finish. You should hear 3 beeps; this indicates parameter programming

is finished.

Manually unlock the gate, then move it half-way and

re-engage. Activate using Push 1 button (as shown

above) The gate should run open. Press Push 1 again

and it should run closed. The gate is now set up for

regular usage.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 54 55

Pas de commentaire

Estate Swing Manuel d'instructions Page 39