Estate Swing Manuel d'instructions télécharger pdf (Page 42)

E-S 300 / 302 Classic Series Instruction Manual

4.5

433 Plug-in Receiver

1. With the red plug already inside the control box,

run the grey receiver wire out of the box through

one of the water tight connections.

2. Find a location for the receiver box on the gate

post or a fence post that is within the length of the

receiver wire.

3. Using a #6 screw attached the top of the receiv-

er to the post. If you are happy with this position use

the small provided set screw in the bottom hole to

secure the receiver in place.

4. Attach the receiver wire to the terminals as seen

below. Please note that you will find a factory in-

stalled jumper wire connected on the receiver.

Leave this jumper wire in place. One of the termi-

nals that has the jumper wire will have the White

wire added to the terminal.

Green = CH1 White = CH1 Red=V+

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 54 55

Pas de commentaire

Estate Swing Manuel d'instructions Page 42