Estate Swing Manuel d'instructions télécharger pdf (Page 23)

E-S 1000D Series Instruction Manual

Installation of Operator—Push-to-Open

2.12

Before permanently attaching any brackets, be sure to test arm motion

and clearance.

7) Place the upper “L” shaped bracket

and the boomerang bracket on the lower

“L” shaped bracket. Position the brackets

in the setback that is being used.

8) With the 3 brackets clamped together,

mark then drill the upper “L” shaped brack-

et in place and attach it using 3/8” car-

riage bolts. [See Fig. 5]

9) Drill through the center hole of the “L”

shaped set to penetrate the boomerang

bracket. Double check the setback on the

boomerang bracket.

10) Drill the set hole through all 3 brackets

using a 5/16” drill bit in an area behind the

first hole. Secure the hole with a 5/16” bolt

and the provided nuts and lock washers.

[See Fig. 6]

Fig 5

Fig 6

Continue on next page.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 56 57

Pas de commentaire

Estate Swing Manuel d'instructions Page 23