Estate Swing Manuel d'instructions télécharger pdf (Page 31)

E-S 1000D Series Instruction Manual

For Your Convenience

3.5

The green terminal strips on the control board are easily removed for wiring. Simply

pull straight out on the terminal strip to remove it from the board. It will slide right off.

Slide it back on when you are finished with your wiring connections.

Take the terminal block off of the control board

to insert wires. Hold with screw terminals facing

upward.

Turn the screw counter-clockwise to open the

terminal and clockwise to close the terminal.

The terminals come closed. Be sure not to mis-

take this for open and insert the wires below the

terminal clamp. This will lack the conductivity to

complete the circuit.

Be sure you are placing your wires

in the terminal block correctly.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 56 57

Pas de commentaire

Estate Swing Manuel d'instructions Page 31