Estate Swing Manuel d'instructions télécharger pdf (Page 11)

Installation of Operator—Pull-to-Open

E-S 500 / 502 Classic Series Instruction Manual

2.5

5. Temporarily position the gate side mounting bracket. (horizontal

position does not matter, vertical position on the gate is the position

you are matching to the post bracket.) Position your assembled gate

mounting along the previously drawn vertical line and level the

angled piece with the horizontal piece of the gate mounting bracket

using a level. Mark your holes, drill and attach the brackets using 4)

3/8” carriage bolts.

6. WITH THE GATE IN THE CLOSED POSITION measure 53” from the

center hole of the “boomerang” shaped bracket to the center hole

of the gate bracket – this should be the position of the gate bracket

on the closed gate.

7. Attach the gate mounting bracket using carriage bolts, nuts, and

washers.

Gate Side Bracket

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Pas de commentaire

Estate Swing Manuel d'instructions Page 11