Estate Swing Manuel d'instructions télécharger pdf (Page 9)

IMPORTANT: Determining Correct Setback

E-S 500 / 502 Classic Series Instruction Manual

2.2

PULL TO OPEN - Standard operation. This means the gate operator is mounted on the

inside of the property and pulls your gate in towards the property. If you are going to use

push to open operation “X” out the next 3 pages and use the push to open section

instructions.

To the right are 3 common

examples of setback mountings.

These are not the only options for

mounting.

There a 3 factors to keep in mind when

finding the setback mounting:

1) The measurements must be correct

from the center of the hinge of the gate

to the center of the hole on the mounting

bracket.

2) There must be clearance for your

opener to attach to your gate in the

closed position.

3) The brackets do not move or pivot

after mounting, if you can achieve the

setback and clearance then bracket

position is inconsequential.

It is best to C-Clamp brackets on and test

arm movement clearance before

permanently attaching them.

Variations to the ideal setback can be

made, so long as the total is less than the

combined measurements for the desired

opening arc and the motor body is more

than 2 inches away from the gate in both

the open and closed position. (setback

variations significantly reduces the length

and weight capacity of the operator)

A B Sum

6" 8 ½" 14

110

7 ½" 9" 16 ½ 100°

9 ½" 9 ½" 19 90°

To determine the position of the gate

mounting bracket (above is for the post

mounting bracket) refer to step 6 in the

section “Installation of operator”

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Estate Swing Manuel d'instructions Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Interphones de porte Estate Swing